P.M.S Engineering Services P.M.S Engineering Services
P.M.S Engineering Services spray drying nozzle manufacturers, fire fighting nozzle suppliers spray drying nozzle manufacturer, fire fighting nozzle supplier spray drying nozzles manufacturers, fire fighting nozzles suppliers
P.M.S Engineering Services



P.M.S Engineering Services
P.M.S Engineering Services
Home Spray Drying Accessaries

Spray Drying Accessaries


P.M.S Engineering Services

Acoustic Sonic Horn

Known to produce vibrations at relatively low frequencies, our range of Acoustic horns is used to remove soot and other buildups of particulates from chimneys, catalyst beds, or other process vessels. Suitable for areas that are inaccessible to slag, these sonic horns are relatively inexpensive to operate, and are most effective when used frequently to prevent the buildup of undesirable particles.

Product Specifications for Acoustic Horns
  • Fundamental frequency
  • Output power level
  • Materials of construction
  • Weight
  • Length
  • Air consumption
  • Shape

Product Specifications for Acoustic Horns
  • Each Sonic Horn is shop tested and tuned for maximum performance
  • For ease of installation, Corona Sonic Horns can be shipped with shop installed mounting flanges and custom mating connections to fit each specific applications
  • Bells and Drivers are constructed of either carbon or stainless steel with sanitary fabrication available
  • At Corona's shop IAC can rebuild and services all make and model or Sonic Horns after years of use or severe duty to save customers the costs of new Sonic Horns



Spray Drying Accessaries

P.M.S Engineering Services




P.M.S Engineering Services

Fire Fighting Nozzle

EDT provides the technical knowledge to design adequate Fire Suppression Systems relative to your spray drying equipment.

Fire suppression systems require strategic placement of fire nozzles for sample water deluge that will protect equipment in the case of fire. EDT liquid-activated fire suppression nozzles provide this deluge by utilizing a specially designed spray head that fully extend under liquid pressure during fire suppression system activation.

Our complete fire suppression system includes EDT liquid-activated fire suppression spray nozzles, dump valves, water valves, controls and installation.

Dump valves in our fire suppression system provide an outlet for water drainage to prevent components from filling with water, which can damage the structural support of the component.

Fire Suppression Spray Nozzle
EDTs fire suppression spray nozzle follows the same concept as our CIP Spray Nozzle. The fire nozzle is a retractable, liquid-activated design. Our specially designed spray head extends under liquid pressure and remains stationery providing constant water deluge as long as the system is activated. The fire suppression spray nozzle is constructed of stainless steel and is USDA Accepted for sanitary applications.

Sanitary Dump Valve
EDT sanitary dump valves are raising the standards in equipment protection.

The dump valve will reduce and prevent structural damage to the building and drying equipment that is caused by equipment becoming weighted with water during fire suppression activation. EDTs dump valve is specifically designed with a powerful long stroke to freely relieve components of dousing water, therefore, preventing water collection. Dump valves are placed on cyclones, baghouses, and other equipment that do not have an open discharge for water to escape.

EDTs sanitary dump valve is constructed of stainless steel in accordance to USDA guidelines.



Spray Drying Accessaries

P.M.S Engineering Services




P.M.S Engineering Services

Spray Drying Nozzle

Evaporator Dryer Technologies has the modern technology and know-how to design, engineer and supply evaporation and spray drying systems in a variety of process configurations.

Spray Drying Systems - Main Component Configurations

Whey Drying Systems
Whey and Whey Permeate Spray Drying system. In this system configuration, product is exposed to low temperatures during the drying process to convert -lactose to a-lactose crystals in whey or whey permeate. The result is powder that is non-hygroscopic and free flowing. Main components of this system include an evaporator, feed system, drying chamber, lactose conversion belt, vibrating fluid bed, cyclones and wet scrubber. This type of system is extremely energy efficient with energy costs up to 24 percent less per lb. of powder compared to traditional straight through spray drying methods.




P.M.S Engineering Services

P.M.S Engineering Services


Product Range